MSM
The Modern Paper Mill

The Modern Paper Mill

The modern paper mill is a highly complex industrial facility. Although the principles of papermaking have not fundamentally changed for many years, a papermaker from Imperial China or pre-industrial Europe would be hard pressed to recognize his craft amongst all the equipment of a modern mill. To explore how a present-day paper mill operates, let's follow the path of an individual wood fiber from its arrival at the mill to its departure.

Delivery and Preparation

Most of the mill's raw material arrives by truck or rail in the form of logs. The logs are soaked in water and tumbled in slatted metal drums to remove the bark. The debarked logs are then fed into a chipper, a device with a rotating steel blade that cuts the wood into pieces about 1/8" thick and 1/2" square. (In some cases, the wood may have been chipped, bark and all, when it was harvested.) The wood chips are stored in a pile outside the mill; as new chips are added to the top of the pile, others are withdrawn fro the bottom and carried by conveyor to the digester.

Pulping

Digesting is the process of removing lignin and other components of the wood from the cellulose fibers which will be used to make paper. Lignin is the "glue" which holds the wood together; it rapidly decomposes and discolors paper if it is left in the pulp (as in newsprint, which is usually made from groundwood pulp with little or no chemical treatment). Since this is a "kraft" mill, the lignin is removed by the action of sodium hydroxide ("caustic soda")

[Karl Note:  Sodium hydroxide is very toxic.  The Material Safety Data Sheet is here.   It is also called "caustic soda."  Here is an encyclopedia description:

and sodium sulfate

[Karl Note:  Sodium Sulfate is not toxic.  The Material Safety Data Sheet for it is here.  Hoffmann-La Roche is one of the world's largest producers of Vitamin C, and it manufactures about 20 tons of this per year, as one of the substances used to make Vitamin C.  About 45% of all US production is used in the detergent industry while 18% is used for paper pulping.]

under heat and pressure. The chips are fed into the top of a digester and mixed with the cooking chemicals, which are called "white liquor" at this point. As the chips and liquor move down through the digester, the lignin and other components are dissolved, and the cellulose fibers are released as pulp. At the bottom of the digester, the pulp is rinsed, and the spent chemicals (now known as "black liquor") are separated and recycled.

Bleaching and Refining

At this point, the "brownstock" pulp is free of lignin, but is too dark to use for most grades of paper. The next step is therefore to bleach the pulp by treating it with chlorine, chlorine dioxide, ozone, peroxide, or any of several other treatments. A typical mill uses multiple stages of bleaching, often with different treatments in each step, to produce a bright white pulp. Chlorine bleaching generally provides the best performance with the least damage to the fibers, but concerns about dioxins and other byproducts have led the industry to move towards more environmentally friendly alternatives.

At this point, the individual cellulose fibers are still fairly hollow and stiff, so they must be broken down somewhat to help them stick to one another in the paper web. This is accomplished by "beating" the pulp in the refiners, vessels with a series of rotating serrated metal disks. The pulp will be beaten for various lengths of time depending on its origin and the type of paper product that will be made from it. At the end of the process, the fibers will be flattened and frayed, ready to bond together in a sheet of paper.

Forming the Sheet

Once the pulp has been bleached and refined, it is rinsed and diluted with water, and fillers such as clay or talc may be added. This "furnish", containing 99% water or more, is pumped into the headbox of the paper machine. From the headbox, the furnish is dispensed through a long, narrow "slice" onto the "wire", a moving continuous belt of wire or plastic mesh. As it travels down the wire, much of the water drains away or is pulled away by suction from underneath. The cellulose fibers, trapped on the wire as the water drains away, adhere to one another to form the paper web. From the wire, the newly formed sheet of paper is transferred onto a cloth belt (or "felt") in the press section, where rollers squeeze out much of the remaining water.

Coating, Drying, and Calendering

After leaving the press section, the sheet encounters the drying cylinders. These are large hollow metal cylinders, heated internally with steam, which dry the paper as it passes over them. The sheet will be wound up and down over many cylinders in the drying process. Between dryer sections, the paper may be coated with pigments, latex mixtures, or many other substances to give it a higher gloss or to impart some other desirable characteristic. After another round of drying, the paper sheet is passed through a series of polished, close-stacked metal rollers known as a "calender" where it is pressed smooth. Finally, the sheet is collected on a take-up roll and removed from the paper machine. From the headbox, it may have traveled half a mile or more in less than a minute.

Cutting and Packaging

In many cases, the new paper roll is simply rewound on a new core, inspected, and shipped directly to the customer. Other paper grades, however, may be further smoothed by passing them through a "supercalender" where the sheet is polished by passing between steel and hard cotton rollers (much like ironing fabric), or they may be embossed with a decorative pattern. The paper may also be cut into sheets at the mill, often by automatic equipment which accepts a roll of paper at one end and delivers packages of cut sheets at the other, already boxed and wrapped for shipping.

Papermaking today is one of North America's most capital-intensive industries, devoting large sums of money to the development and construction of newer and more efficient equipment and processes. Although we ourselves might not recognize the paper mills of three hundred years from now, the same basic processes will almost certainly be in use to produce a product that will still be in demand far into the future.

SUBSCRIBE:  The Wednesday Letter is a free electronic monthly newsletter written and published by Karl Loren.  You can view more than 50 back issues of this publication by clicking here.  The Wednesday Letter subscription list is maintained on a secure server, no name is ever given or sold to anyone, and it is never used except for this Newsletter.  It is automatically published on the Tuesday night just before the first Wednesday of every month.  You can subscribe to this free monthly electronic letter by entering your eMail address and name below.  You will then automatically receive a request for confirmation, sent to whatever address you have entered.  If you do NOT receive this confirmation request, then you will not be subscribed.  There may have been an error with your address and you should resubmit.  The letter is never sent twice to the same address -- so you do not have to worry about a duplicate subscription.  When you receive this confirmation request you must reply to it, or your subscription will not become active.  No one can subscribe your name, and address, without you being notified, and if you get an unwanted notice of subscription you only need to DO NOTHING and the subscription will NOT be active.

REMOVAL:  You can remove yourself from the subscription list in several different ways.  Click here to read about this entire newsletter system.  Every edition of The Wednesday Letter is delivered to your address with YOUR name and address in view on the letter, with a link that allows you to remove THAT name from the subscription list.  If you try to send this removal message from an address different from the one you used to send in your original confirmation, then you will get a warning notice first, sent to the subscription address, asking you to confirm that you want to be removed from the list -- by replying to THAT request for confirmation, you will then be automatically removed.  Thus, no one else can unsubscribe you, from some other computer, without your knowledge.  But, if you send in the unsubscribe notice from the same machine used to receive the Letter, then the removal from the subscription list is automatic.

Personal Message:  When you send a personal message to Karl Loren, you will receive a personal reply as per his instructions.  Karl pledges that every personal message will get a personal answer. When you provide your mail address, we will send you free information including our free catalog and a cassette tape lecture by Karl Loren about heart disease, no charge, by mail, even if outside the US.  You can select particular information you would like to receive, along with the free cassette tape and catalog.